What is Sintered Ceramic?

There are times we are asked “what is sintered ceramic?” so we thought we would help explain that to you today. You may have also heard it called man-made stone, artificial stone, sintered stone or ultra-compact surface.

Sintered ceramic is formed by heat and extreme pressure without melting to the point of liquefaction. Simplified, it is an accelerated version of what happens in nature over millions of years to create natural stone.

The process relies on using natural materials, ground down to small particles and then compacted under heat and pressure.

It starts with natural ingredients such as: Silica, Quartz, Feldspars, Clays and Mineral pigments.

The mix of powdered or sand materials determines strength, hardness, chemical stability, and workability. The ingredients are processed under extreme heat and a pressure of more than the weight of the Eiffel Tower to form one solid slab. It is fired in the kiln/oven at 1200 degrees to dry out and in doing so is baked and the particles are fused together.

Because the slab is made from natural materials, it is UV resistant. And, because it is put under such pressure and heat, it is highly resistant to scratching, extreme temperatures, water and stains. To find out more about Ceramitex – Sintered Ceramic Facade System go to our contact page and send us a message today.

 

If you have any trouble viewing the video – you can click the link to check out the first video in our Elemex Vlog Series

Hello and welcome to today’s episode. Today we are going to talk about exterior corners.
Here at Elemex, we prefer mitered corners on all our surfaces. As you can see by the examples, the mitered corner gives a striking dimensional appearance to any returning edge.

Open or butt corners are often used in the industry and here are a few samples of what that might look like.
The negatives about an open corner are that you can see into the system and see the insulation or framing behind the panels. This takes away from the exterior appearance.

Also an open joint system allow a lot more moisture into the system as snow and rain can go directly into the wall cavity.
Our prefabricated panels will keep your corners looking straight and not have to deal with lining up miters on site during installation.

What is Corten? Weathered steel is often referred to as corten and it usually takes 2-4 years to reach the rusty patina look.
Here is an example of an untreated piece of metal that has been exposed to moisture. As you can see – the material can be affected and stained by moisture or oils.

Another issue with the corten steel is that it can lead to rust staining on other parts of your building nearby.
You have probably noticed buildings with the look of corten as the rust develops naturally. The issue is that sometimes it is so unpredictable and uneven that it makes the building look shabby instead of aged. There are products on the market that can replicate the look without the mess and unforeseeable outcome.

Ceramitex includes an Iron Corten pattern that you could use on your building. It is very durable and has the look of corten from day one with the bonus of not fading or changing over time. As you can see how easily damaged real corten can get damaged versus Ceramitex.

If you have any trouble viewing the video – you can click the link to check out the third video in our Elemex Vlog Series